Search

Home > News > Content
Full Overlay Hinges,Half Overlay Hinges And Inset Hinges
Sep 25, 2018

The difference for Full overlay hinges,Half overlay hinges and Inset hinges.


Cabinet hinge design is generally divided into full cover, half cover and inside, might as well be called the straight arm, in the song and daqu, or called bend straight, bend and greater curvature, etc., all of them called from place to place and appropriate. The design of cabinet hinges is generally divided into full cover, cover and inside, might as well be called the straight arm, in the song and daqu, or called straight curved, large bending and bending, etc., all of them called from place to place and appropriate.


In ambry design and manufacturing, general use 18 mm thickness of door plank is in the majority, of course, there are a few is 15 mm or 16 mm, and we all cover refers to ambry door plank of cabinet hinges close up after, just completely covered the side panel, and then it is just the cover of a 18 mm, so that we say normally cover is cover 18 mm plate, all of them, and install all cover cabinet hinge, door plank of general drilling distance of 5 mm.


It is very easy to understand what is going on with the full cover, which means that after the door panel is closed, half of the side panel is covered, which is about 9MM. We can see the side panel on the half of the cabinet body when facing the front, while the full cover can't see the side panel.


And then we talk about inner hiding, which means that the door panels are completely hidden inside the side panels, and then the side panels are completely exposed, and when we look straight in, we can see that the side panels are on the same level as the door panels.


Some people like to say: C=0,C=9,C=18, which is what we say: full cover, half cover and inner cover. We can also see that the plate they use is 18MM. According to theory,C= 15 means that the plate they use is 15MM thick.


Some people may ask, you said the full cover is covered with 18MM board, so can I use 15 or 16MM board? This is ok. We only need to adjust the drilling distance. The plate with a cover of 18MM has a drilling distance of 5MM.


Accordingly, in the process of hinge of cupboard of choose and buy, want to undertake choose and buy according to oneself actual need

HTB1wngnKbSYBuNjSspiq6xNzpXah.jpg


Related News